UV/LED Lamp - Rubber White - Matte Effect

UV/LED Lamp - Rubber White - Matte Effect

A must-have piece for salons.

Our UV/LED best seller lamp has arrived in its trendiest version yet, in a matte white color. Thanks to its special rubber coating, dust remains unnoticed on it. On the top of the lamp, there are buttons for 10, 30, and 60-second timers, as well as buttons for halving the curing time and providing lower temperatures to alleviate the increasing sensation of heat for more sensitive clients during curing. If you want to cure twice as fast, you can use the lamp's doubling mode. With 30 LED bulbs, there are no dead zones, ensuring even the most difficult-to-cure materials (UV and LED gels) cure perfectly inside.

Advantages:

• Digital display: Shows remaining and elapsed time
• Removable base part: Facilitates the work of pedicurists
• Smart sensor: Detects our hands during insertion and removal, allowing you to choose between motion-sensing or button/manual control for on/off switching according to your preference
• Mirrored bottom part: Reflects and disperses UV light

Technical specifications:

• 30 LED
• Maximum power output: 48 W
• Adapter input: 100-240 V 50/60 Hz 1 A
• Output: DC 24 V 2 A
• Size: 15198.5 cm

How to use?

1. Connect the AC power cable to the electrical outlet and the lamp.
2. During operation, select the duration: 10s/30s/60s. By turning on the halving mode, the curing time becomes 99s, increasing the power to maximum halfway through, thus providing a solution to alleviate the heat sensation during gel curing. If the user does not activate the timer, infrared sensors turn on the device when the guest inserts their hand. Maximum operating time is 99s.
3. Remove any dust from the surface with a soft-bristled brush.

Before commissioning for intended use, all packaging materials and protective films must be removed from the product.